[Academic Member of Mechanical]

Mohammad Taghilou

view:26364   Last Update: 2025-6-7

فارسی English
Supervisor/ Advisor of Projects


Course: M.Sc
No. Student Date of Defence Field Topic Supervisor/ Advisor
16 Morteza Khayati September  2017Mechanical Engineering Numerical and experimental study of resin transfer molding process and numerical optimization of filling time 
[Abstract] 		 Advisor
15 Masud Enayati February  2018Mechanical Engineering Numerical investigation of the effects of phase change materials to improve the thermal behavior of 3D heat sink with OpenFOAM 
[Abstract] 		 SuperVisor
14 Sajad Zarei February  2019Mechanical Engineering Simulation of a two-dimensional droplet based on the modified pseudo-potential model using multiple relaxation time method considering surface effects 
[Abstract] 		 SuperVisor
13 Aref Salimi September  2018Mechanical Engineering Correcting the deviation of the Boltzmann equation and investigation of different boundary conditions in the hydro-thermal flow around a rotating cylinder 
[Abstract] 		 Advisor
12 Amin Najafi December  2019Mechanical Engineering Numerical investigation of heat transfer from two dimensional droplet with high density ratio at the vicinity of the solid surface using lattice Boltzmann method: Reduction of the thermal parasites 
[Abstract] 		 SuperVisor
11 Nasrin Ahmadi Jouki September  2020Mechanical Engineering – Energy Conversion Numerical Simulation of the Effect of Porous Bed on Dense Flow Behavior Using Large Eddy Simulation (LES) in OpenFOAM   SuperVisor
10 Seyyed Alireza Safavi September  2020Mechanical Engineering – Energy Conversion Numerical Investigation of Natural Convection Effects on Phase Change Material Melting Process within a Porous Medium under Local Thermal Non-Equilibrium Conditions Using the Lattice Boltzmann Method   SuperVisor
9 Aida Shakibaei March  2021Mechanical Engineering – Energy Conversion Proposing a New Model Based on the Discrimination Function to Achieve High Density Ratio and Controllable Surface Tension Using the Single-Temperature Lattice Boltzmann Method   SuperVisor
8 Amir Reza Behrouzi April  2021Mechanical Engineering – Energy Conversion Numerical Investigation of the Effect of Nanoparticles on the Thermal Conductivity of Phase Change Materials (PCMs) in the Thermal Management of an Industrial Battery and Temperature Distribution Analysis during Charging and Discharging Processes Using th   SuperVisor
7 Rihaneh Khatami June  2022Mechanical Engineering – Energy Conversion Numerical Simulation of a Solid Oxide Fuel Cell (SOFC) Considering Local Thermal Non-Equilibrium Conditions in Cathode and Anode Electrodes Using the Lattice Boltzmann Method 
[Abstract] 		 SuperVisor
6 Ali Mehrania July  2022Mechanical Engineering – Energy Conversion Numerical Investigation of Phase Change Material Melting Process in a Fin-Enhanced Double-Pipe Heat Exchanger under Vertical Orientation with Constant and Time-Dependent Boundary Conditions   SuperVisor
5 Mohammad Saeed Mohammadi September  2023Mechanical Engineering – Energy Conversion Thermal Behavior Investigation of a Lithium-Ion Battery in the Presence of a Phase Change Material Combined with a Porous Medium under Local Thermal Non-Equilibrium Condition Using the Lattice Boltzmann Method   SuperVisor
4 Vahid Barati Zahrai January  2024Mechanical Engineering – Energy Conversion Numerical Investigation of Local Temperature Gradients in the PEN Structure of a Solid Oxide Fuel Cell through Interconnect Cooling and Variation of Fuel and Air Channel Cross-Sections   SuperVisor
3 Yashar Khorrami September  2024Mechanical Engineering – Energy Conversion Numerical Investigation of Active and Passive Thermal Management of a Prismatic Lithium-Ion Battery Pack with Porous Medium-Enhanced Phase Change Material during Continuous Charge–Discharge Cycles   SuperVisor
2 Amin Kordestani January  2025Mechanical Engineering – Energy Conversion Application of Porous Medium in Forced Cooling of a Cylindrical Lithium-Ion Battery Module during Discharge, Charge, and Subsequent Rest Periods   SuperVisor
1 Samaneh Rouhani January  2025Mechanical Engineering – Energy Conversion Numerical Investigation of Electronic Base Plate Cooling Using a Combination of Forced Convection and Phase Change Material within a Heat Sink Filled with Porous Medium   SuperVisor

Course: B.Sc
No. Student Date of Defence Field Topic Supervisor/ Advisor
41 Amir Hossein Davudi August  2015Mechanical Engineering Permeability prediction of single phase flow through the porous medium using LBM    SuperVisor
40 Masud Enayati September  2015Mechanical Engineering Modification of thermal behavior of plane wall using phase change material   SuperVisor
39 Mohammadreza Ganjkhanlou September  2015Mechanical Engineering Simulation of PCM solidification inside a cylindrical cylinder imposing convective BC   SuperVisor
38 Erfan Ojaghi September  2015Mechanical Engineering Investigation of natural convection effects on the PCM solidification   SuperVisor
37 Mahdi Zolfkhani Mohsen Moghimi September  2015Mechanical Engineering Design and manufacturing of solar cooker   SuperVisor
36 Mohsen Rostami September  2016Mechanical Engineering Thermal battery design for protecting temperature of engine oil using PCM   SuperVisor
35 Farhad Montakhabi August  2016Mechanical Engineering Numerical investigation on the temperature variation inside a metal structure    SuperVisor
34 Ali Sarlak July  2016Mechanical Engineering 3D numerical simulation of a double-pipe heat exchanger containing PCM   SuperVisor
33 Milad Galerafati September  2016Mechanical Engineering Numerical study of the forced heat convection and phase change process from tubes containing phase-change material using LBM   SuperVisor
32 Majid Abbasian September  2016Mechanical Engineering Numerical study of the free convection from the tubes containing phase-change materials using the utilizing LBM   SuperVisor
31 Mohammad Noruzi September  2016Mechanical Engineering Numerical investigation of the forced convection inside a 2D channel containing solid particles using the lattice Boltzmann method   SuperVisor
30 Alireza Abdollahi September  2017Mechanical Engineering 3D simulation of the melting process inside a double-pipe finned heat exchanger to study the effects of natural convection   SuperVisor
29 Nasrin Ahmadi September  2017Mechanical Engineering 3D simulation of fluid-heat flow on a perforated surface to control the temperature of the base plate   SuperVisor
28 Ghazaleh Yeganeh Fard September  2017Mechanical Engineering Numerical investigation of the effects of fin and jagged surface in the solid-liquid phase change and forced heat transfer in a flat channel   SuperVisor
27 Alireza Nouri September  2017Mechanical Engineering Simulation of the PCM melting process inside a grooved double-pipe heat exchanger for use in power storage systems   SuperVisor
26 Saleh Mohammadrezaei September  2018Mechanical Engineering Numerical Study of the Dynamic Behavior of Two-Dimensional Droplet Collisions with Solid Surface Using the LBM   SuperVisor
25 Aida Shakibaei September  2018Mechanical Engineering Development of Zikovich's method for simulating the melting process of PCM under pure conductivity conditions   SuperVisor
24 Khashayar Nirizi December  2018Mechanical Engineering Improving Heat Performance of Heat Exchangers with PCM Using Increased Conductivity in Multi-PCM Arrays in Two Charging and Discharging Modes   SuperVisor
23 Amir Reza Zangouei September  2018Mechanical Engineering Prediction of a two-phase flow pattern with fluctuating airflow into the flow of water in a two-channel channel   SuperVisor
22 Asghar Naderi September  2018Mechanical Engineering Solar Cell Combination with a Thermoelectric Generator in the Presence of a Phase Change Materia for Increasing the Efficiency and Output Power of the System    SuperVisor
21 Seyed Ali Mir Seyed Hassan September  2018Mechanical Engineering Study of the Effects of Electric Circuit Load on the Power and Output Efficiency of a Thermoelectric Generator   SuperVisor
20 Hossein Mohammadi November  2018Mechanical Engineering Calculation of latent and sensible energy stored in a latent energy storage reservoir in the presence of a regular porous medium with time-dependent boundary condition   SuperVisor
19 Hossein Amiri July  2019Mechanical Engineering ncompressible flow cooling around pipes containing PCM: Numerical simulation   SuperVisor
18 Mehdi Bastami August  2019Mechanical Engineering Numerical simulation of the process of melting the phase-changing material containing nanoparticles with metal fins in two-dimensional conditions: development of one-dimensional Zikovich's model    SuperVisor
17 Erfan Eskandari September  2019Mechanical Engineering Three-dimensional analysis of the process of storing and discharging thermal energy in a heat exchanger containing PCM in order to heat the fluid flow    SuperVisor
16 Fateme Afsouni September  2019Mechanical Engineering Simulation of two-dimensional droplet penetration into porous media using fluid volume method    SuperVisor
15 Amir Hossein Rezaei September  2020Mechanical Engineering Numerical Investigation of Natural Convection Effects on the Melting and Subsequent Solidification Process of a Phase Change Material in the Presence of a Metal Fin   SuperVisor
14 Sara Heidari September  2020Mechanical Engineering Numerical Simulation of Simultaneous Melting and Solidification Process of a Phase Change Material (PCM) inside a 2D Enclosure in the Presence of a Porous Medium to Enhance Heat Transfer Rate   SuperVisor
13 Amir Mehdi Kermanshahani September  2020Mechanical Engineering Numerical Investigation of Fluid Flow and Heat Transfer in a Two-Dimensional Channel Filled with a Porous Medium Considering Internal Heat Generation   SuperVisor
12 Saeed Feyzi   Mechanical Engineering Numerical investigation of the heat absorption process and temperature control of a cylindrical tank with internal heat generation: Using a porous medium inside the phase change material   SuperVisor
11 Abolfazl Nikzad September  2020Mechanical Engineering Energy Consumption Management and Optimization Methods   SuperVisor
10 Amir Hossein Aatifeh July  2022Mechanical Engineering Numerical Study of Heat Transfer and Phase Change Process of Paraffin, Evaluation of Different Nanoparticles at Various Mass Fractions on Paraffin Performance, and Investigation of Fin Effect on PCM Melting   SuperVisor
9 Seyyed Adnan Hashemi August  2022Mechanical Engineering Numerical Investigation of Base Plate Temperature Variation Using Extended Surfaces Containing Phase Change Material under Time-Dependent Boundary Conditions   SuperVisor
8 Ashkan Maarefi August  2022Mechanical Engineering Thermodynamic and Parametric Performance Analysis of a Solid Oxide Fuel Cell (SOFC)   SuperVisor
7 Mahdi Kazemi August  2022Mechanical Engineering Numerical Simulation of Mass, Momentum, and Energy Transfer in the Cathode and Air Channel of a Simplified Solid Oxide Fuel Cell (SOFC) Model   SuperVisor
6 Sepideh Ghazvineh August  2023Mechanical Engineering Modeling of Fluid Flow and Heat Transfer and Entropy Generation Rate Calculation in a Thermoelectric Air Conditioning System   SuperVisor
5 Mohammad Najafi September  2023Mechanical Engineering The Effect of Phase Change Material and Porous Medium on the Thermal Performance of Heat Sinks   SuperVisor
4 Mohammad Hossein Afshari August  2024Mechanical Engineering Thermodynamic Simulation of the Performance of a Solid Oxide Fuel Cell (SOFC) Fed with High-Temperature Combustion Gases   SuperVisor
3 Sahar Mohammadi February  2025Mechanical Engineering Comparison of Hydrodynamic Behavior of Incompressible Flow in Porous Media with Square and Circular Structures Using the Darcy–Forchheimer-Brinkman Model   SuperVisor
2 Ali Behrouzi Majd February  2025Mechanical Engineering Numerical Investigation of Incompressible Fluid Flow Behavior in a Porous Medium with Square Structure   SuperVisor
1 Amir Mohammad Talebi June  2025Mechanical Engineering Numerical Investigation of Air Cooling for a Lithium-Ion Battery Pack in Linear and Triangular Arrangements with Fins   SuperVisor